In Brief This company is one of the UK's leading Construction, Civil Engineering and Property Services companies with expertise in delivering projects for their clients in affordable housing, civic buildings & amenities, commercial property, education, health care and transport; which includes airports, highways and rail. They were founded in 1960 this family owned contractor now require a Planner Engineer/Senior Planning Engineer for their Construction projects based in Bristol. The Role of
Stress Engineer - Manufacturing Support Job Description: This vacancy is for a Stress Engineer within the Filton Manufacturing Support Team. The team will be transferred to GKN Aerospace in due course as part of the Zephyr Project. The job involves the analysis of metallic and composite aircraft structure where a report of a manufacturing non conformance or divergence from drawing is received. Working both independently and as part of a team, the engineer will perform analysis using standard
Job Specification: REMARKS & MAJOR PROBLEMS TO BE SOLVED IN THE POSITION Able to understand the engineering fundamentals and to be able to plan, prioritise and chase inputs and outputs to enable the check stress and test and cert teams to be able to deliver. Must be able to independently interact at a middle management level internal and external to working under an experienced ETL/EPM. Will be able to manage trackers and to interface with engineering staff. One of the main areas of respon
Job Specification: REMARKS & MAJOR PROBLEMS TO BE SOLVED IN THE POSITION Able to understand the engineering fundamentals and to be able to plan, prioritise and chase inputs and outputs to enable the check stress and test and cert teams to be able to deliver. Must be able to independently interact at a middle management level internal and external to Airbus working under an experienced ETL/EPM. Will be able to manage trackers and to interface with engineering staff. One of the main areas of
Job Specification: Ref: 82701 Description of Role and Mission: The individual appointed in this position will be required to support the following activities, which are currently undertaken in majority by sub contract staff in the UK. These activities, as argued above, are essential in the frame of environmental improvement programme, firstly to ensure in priority compliance with relevant regulations and minimise potential financial penalties or production disruption through materials obsolesc
Finance Analyst required for a forward thinking, well established, Financial Services institution. The Finance Analyst role involves the production, validation and consolidation of monthly, half yearly and annual financial accounts. A real 'value ad' role, you will implement process improvements, supporting the maintenance of financial control. You will analyse the benefits of promotional activities, products and services of a newly established marketing team. Reporting directly to senior manage
Abrecco are recruiting on behalf of our global client, for an applications programmer to join an existing team in their Bristol office to develop one of their key software solutions. You will need to be a team player happy being involved in the full development lifecycle, with the following skills: Essential: - C and C++ in Windows and/or UNIX - Full software development lifecycle - Mathematical minded, interested in algorithm development Desirable: - OOA/OOD - Interactive graphi
Vacancy Ref: 81901 Wing CoE Design Engineering has defined that in order to improve its overall effectiveness and productivity levels as an organization, that Lean Engineering principles and tools will be applied through the organization to deliver year on year productivity and financial savings targets. The purpose of this role will be to provide robust Project Management (PM) support and direction to the Serial Programmes Outer Wing Engineering Operations Team, primarily focusing on driving
Vacancy Ref: 81901 Wing CoE Design Engineering has defined that in order to improve its overall effectiveness and productivity levels as an organization, that Lean Engineering principles and tools will be applied through the organization to deliver year on year productivity and financial savings targets. The purpose of this role will be to provide robust Project Management (PM) support and direction to the Serial Programmes Outer Wing Engineering Operations Team, primarily focusing on driving
Job Specification: defined that in order to improve its overall effectiveness and productivity levels as an organization, that Lean Engineering principles and tools will be applied through the organization to deliver year on year productivity and financial savings targets. The purpose of this role will be to provide robust Project Management (PM) support and direction to the A400M Outer Wing Engineering Operations Team, primarily focusing on driving all Lean Engineering Continuous Improvement (
Job Specification:Requirement for Stress Engineer in Mechanical Systems Installation & Transportation Group. The Mechanical and Systems Stress group are involved in stress analysis of Fuel, Electrical, Hydraulic, Pneumatic Systems Installation, and leading/trailing edge mechanisms operating slats and flaps. Other areas of the wing considered are ailerons, spoilers, landing gear/engine to wing interface components. Wing Transport and Ground Support Equipment are also covered. Qualifications
Description of Role and Mission: The individual appointed in this position will be required to support the following activities, which are currently undertaken in majority by sub contract staff in the UK. These activities, as argued above, are essential in the frame of Airbus environmental improvement programme, firstly to ensure in priority compliance with relevant regulations and minimise potential financial penalties or production disruption through materials obsolescence, and secondly to ma
Design Engineer - Manufacturing Support Job Description: This vacancy is for a Design Engineer within the Filton Manufacturing Support Team. The team will be transferred to GKN Aerospace in due course as part of the Zephyr Project. The job involves the assessment of metallic and composite aircraft structure where a report of a manufacturing non conformance or divergence from drawing is received. Working both independently and as part of a team, the engineer will carry out Design investigation
Our client, a large blue chip IT and telecommunicatiosn organisation, are currently looking for a number of Network Engineers and Analysts with working experience on technical deployment projects. The company are at the forefront of the modern digital economy, enabling large organisations to exploit fully the benefits of networked IT services and helping them to deal with the political, structural, operational and deployment issues associated with major change. As a result, they have key posit
Our client, a large blue chip IT and telecommunicatiosn organisation, are currently looking for a number of Systems Engineers with working experience on technical deployment projects. The company are at the forefront of the modern digital economy, enabling large organisations to exploit fully the benefits of networked IT services and helping them to deal with the political, structural, operational and deployment issues associated with major change. As a result, they have key positions on live p
£18,000 to £25,000 per year (Full Corporate Benefits Package)
Location
:
Bristol, Avon
Description
:
My Client is based in Bristol and is a publicly owned, UK provider of software solutions and IT services. We supply innovative, market-focused solutions, primarily to the multi-channel retail and manufacturing sectors. In the Bristol office we concentrate on an ERP system for the food industry. We are currently moving our system to ASP.Net VB.Net and require an additional Graduate / Junior VB.Net Developer to help in the redevelopment of the product. There will be training given in the programm
Our client is a customer focused Mechanical and Electrical services provider. They design, build and maintain living and working environments throughout the UK. They currently have a position for a divisional procurement manager to based out of their offices in Leigh The main duties will include: Management of the Divisional Purchasing requirements Hands on Purchasing for specific areas of the Division. Visiting Regional offices and managing Purchasing staff in those locations. Negotiate seco
£15,000 to £15,500 per year (bouns, commission, pension)
Location
:
Bristol
Description
:
Salary: £15, 500 + commission (2k min OTE) + Annual Bonus (10%) Our client is a leading worldwide financial services group operating in many different insurance markets and boasting many market leading brand names. Due to their success they are currently looking for outgoing and confident sales and service advisors candidates for their Central Bristol office. The main focus of the roles is to respond effectively to inbound customer sales and service calls providing the customer with fu
Tasks to be carried out: The job holder will be required to support A380 programme work as follows: - Liaise with the fluid systems design team to refine/verify simulation requirements for avionic test rig. - Maintain and develop test scripting capabilities used on the Fuel Avionics Test Rig. - Maintain and develop simulations of systems external to the Fuel. - Maintain and develop Avionics data bus configurations capabilities used on the Fuel Avionics Test Rig. - Maintain and develop data vis
Task Description: The Fuel Reactive Support department is responsible for the handling of questions for in-service aircraft that relate to Fuel and their associated systems. Additionally the team covers Wing Anti-Icing and some aspects of the wing navigation lighting. We have an immediate need for a Fuel Systems Engineer in Reactive Support. The Reactive Support team ensures that all questions are responded to within agreed timescales (typically within 1, 5 days) to meet the response targets
